TD-1500Y
Applies single power turret for turning and milling process
75 degree lathe structure allowing for good chip removal and controllability
Low machine gravity center, allowing for overall structure to have good rigidity
X/Y/Z-axis are orthogonal to each other, allowing for high straightness and positioning accuracy
Specification | TD-1500Y |
Chuck O.D. | 6″ inch (opt. 8″) |
Bar capacity | Ø26(Opt. Ø41, 51) mm |
X/Y/Z/B axis travel | 155/±35/250 mm |
X/Y/Z/B axis rapid traverse | 30/15/30/ m/min |
Spindle nose | A2-5 |
Spindle speed | 6,000 rpm |
Spindle motor | 16.5/15/11 kW |
Power turret rpm | 6000 |
Tool type | BMT-55 |
Tool capacity | 16 pc |
TD-2000Y[BC]
Applies single power turret for turning and milling process
75 degree lathe structure allowing for good chip removal and controllability
Low machine gravity center, allowing for overall structure to have good rigidity
X/Y/Z-axis are orthogonal to each other, allowing for high straightness and positioning accuracy
Specification | TD-2000Y[BC] |
Chuck O.D. | 8″ inch |
Bar capacity | Ø51(Opt. built-in type Ø51) mm |
X/Y/Z/B axis travel | 230/±51/600/[630] mm |
X/Y/Z/B axis rapid traverse | 30/15/30/[30] m/min |
Spindle nose | A2-6 |
Spindle speed | 4,500 (Opt. 3,500) rpm |
Spindle motor | 18.5/15/11 kW |
Sub-spindle chuck O.D. | [6″] inch |
Sub-spindle speed | [5,000] rpm |
Sub-spindle motor | [7.5/5.5] kW |
Tool capacity | 12 pc |
TD-2500Y[BC]
Applies single power turret for turning and milling process
75 degree lathe structure allowing for good chip removal and controllability
Low machine gravity center, allowing for overall structure to have good rigidity
X/Y/Z-axis are orthogonal to each other, allowing for high straightness and positioning accuracy
Specification | TD-2500Y[BC] |
Chuck O.D. | 10″ inch (opt. 12″) |
Bar capacity | Ø62(Opt. Ø77, 86) mm |
X/Y/Z/B axis travel | 230/±51/600/[630] mm |
X/Y/Z/B axis rapid traverse | 30/15/30/[30] m/min |
Spindle nose | A2-8 |
Spindle speed | 3,500 (Opt. 3,500) rpm |
Spindle motor | 18.5/15/11 kW |
Sub-spindle chuck O.D. | [6″] inch |
Sub-spindle speed | [5,000] rpm |
Sub-spindle motor | [7.5/5.5] kW |
Tool capacity | 12 pc (opt 16) |