CNC multi tasking lathe Mori Seiki MT 2500SZ/1500
Year: 2004
Capacities:
Center distance 1 828 mm
Swing over bed 910 mm.
Max turning diameter 540 mm.
Turning length 1 530 mm
Milling head:
Full B-axis +/- 120 deg. (0,001 deg)
Z-axis 1 599 mm
X-axis 565 mm
Y-axis +/- 115 mm
Capto C6 spindle, 8 000 rpm, 18,5/15/11 kW
Automatic tool changer 120 positions.
Rapid travel X/Y/Z 24/16/24 m/min
B-axis indexing time 90 deg = 2,0 sec.
Tool change time T-T 1,6 sec.
Turret:
12 positions, all driven
Z-axis 1 479 mm
X-axis 155 mm.
Rapid travel X/Z 20/24 m/min
Dimension square tools 25 x 25 mm
Dimension round tools dia. 40 mm. max.
Driven tools 4 000 rpm, 7,5/1,5 kW
Indexing time closest tool 0,26 sec.
Main spindle:
Kitagawa B212A821 E hydraulic 3-jaw chuck, cylinder S2091
4 000 rpm, 22/15 kW, 725 Nm
Automatic 2-step gear box
Spindle nose A2-8
Through hole 75 mm (with hydraulic chuck)
Full C-axis 0,001 deg.
Sub spindle:
Kitagawa B210A6 hydraulic 3-jaw chuck
4 500 rpm, 22/15 kW, 433 Nm
Automatic 2-step gear box
Spindle nose A2-6
Through hole 65 mm (with hydraulic chuck)
Full C-axis 0,001 deg
Rapid travel ZS 24 m/min
General:
Power consumption 120 kVA
Current 400 V/50 Hz
Coolant tank capacity 400 l.
Chip conveyor right side extraction.
Coolant through spindle
High pressure coolant pump 14 bar with cyclone filter
Coolant gun
Automatic door
Rotoclear windows x 2
Caps Server
Complete set of manuals.
CNC Lathe Okuma LT300-M
Year: 2003
Capacity: | ||
Swing over bed | mm | 550 |
Distance between chucks | mm | 970 |
Left spindle speed | rpm | 38-5 000 |
Right spindle speed | rpm | 38-5 000 |
Travels: | ||
ZA | mm | 930 |
ZB | mm | 940 |
W | mm | 940 |
XA | mm | 270 |
XB | mm | 230 |
Upper turret | pos | 12, all driven |
Lower turret | pos | 12, all driven |
Rapid travel ZA, ZB, W | mm/min | 40 000 |
Rapid travel XA, XB | mm/min | 30 000 |
Spindle motors | kW | 22/15 |
Live tooling motors | kW | 7,0/3,3 |
Chip conveyor | ||
Part catcher | ||
Part conveyor | ||
Tool setter for both turrets | ||
CNC OSP-E100L | ||
Bar feeder Simag 70.1 R-3 + full equipment, channels, pushers etc.
|
||
Machine in excellent condition. Under power in our warehouse and ready for inspection. |
CNC Lathe Okuma LH35-N
Year: 1987
Newly renovated with reground guideways and a lot more. Exceptionally good condition.
Capacities: | ||
Swing over bed | mm | 600 |
Swing over cross slide | mm | 350 |
Center distance | mm | 3 000 |
4-position tool post in front side
6-position disc turret on back side Hydraulic tail stock quill |
||
Chip conveyor | ||
Coolant equipment | ||
CNC OSP 5000L-G |
Machine in excellent condition. Under power in our warehouse and ready for inspection.