CNC lathes

CNC multi tasking lathe Mori Seiki MT 2500SZ/1500

Year: 2004

Capacities:

Center distance 1 828 mm

Swing over bed 910 mm.

Max turning diameter 540 mm.

Turning length 1 530 mm

Milling head:

Full B-axis +/- 120 deg. (0,001 deg)

Z-axis 1 599 mm

X-axis 565 mm

Y-axis +/- 115 mm

Capto C6 spindle, 8 000 rpm, 18,5/15/11 kW

Automatic tool changer 120 positions.

Rapid travel X/Y/Z 24/16/24 m/min

B-axis indexing time 90 deg = 2,0 sec.

Tool change time T-T 1,6 sec.

Turret:

12 positions, all driven

Z-axis 1 479 mm

X-axis 155 mm.

Rapid travel X/Z 20/24 m/min

Dimension square tools 25 x 25 mm

Dimension round tools dia. 40 mm. max.

Driven tools 4 000 rpm, 7,5/1,5 kW

Indexing time closest tool 0,26 sec.

Main spindle:

Kitagawa B212A821 E hydraulic 3-jaw chuck, cylinder S2091

4 000 rpm, 22/15 kW, 725 Nm

Automatic 2-step gear box

Spindle nose A2-8

Through hole 75 mm (with hydraulic chuck)

Full C-axis 0,001 deg.

Sub spindle:

Kitagawa B210A6 hydraulic 3-jaw chuck

4 500 rpm, 22/15 kW, 433 Nm

Automatic 2-step gear box

Spindle nose A2-6

Through hole 65 mm (with hydraulic chuck)

Full C-axis 0,001 deg

Rapid travel ZS 24 m/min

General:

Power consumption 120 kVA

Current 400 V/50 Hz

Coolant tank capacity 400 l.

Chip conveyor right side extraction.

Coolant through spindle

High pressure coolant pump 14 bar with cyclone filter

Coolant gun

Automatic door

Rotoclear windows x 2

Caps Server

Complete set of manuals.

Kontakta oss om denna maskin

CNC Lathe Okuma LT300-M

Year: 2003

Capacity:
Swing over bed	mm	550
Distance between chucks	mm	970
Left spindle speed	rpm	38-5 000
Right spindle speed	rpm	38-5 000
Travels:
ZA	mm	930
ZB	mm	940
W	mm	940
XA	mm	270
XB	mm	230
Upper turret	pos	12, all driven
Lower turret	pos	12, all driven
Rapid travel ZA, ZB, W	mm/min	40 000
Rapid travel XA, XB	mm/min	30 000
Spindle motors	kW	22/15
Live tooling motors	kW	7,0/3,3
Chip conveyor
Part catcher
Part conveyor
Tool setter for both turrets
CNC OSP-E100L
Bar feeder Simag 70.1 R-3 + full equipment, channels, pushers etc.
Machine in excellent condition. Under power in our warehouse and ready for inspection.

Kontakta oss om denna maskin

CNC Lathe Okuma LH35-N

Year: 1987

Newly renovated with reground guideways and a lot more. Exceptionally good condition.

Capacities:
Swing over bed	mm	600
Swing over cross slide	mm	350
Center distance	mm	3 000
4-position tool post in front side 6-position disc turret on back side Hydraulic tail stock quill
Chip conveyor
Coolant equipment
CNC OSP 5000L-G

Machine in excellent condition. Under power in our warehouse and ready for inspection.

Kontakta oss om denna maskin

CNC Lathe Okuma LCS-15

Year: 2000

Capacities:
Max turning diameter	mm	270
Max turning length	mm	450
Spindle speed	rpm	6 000
Spindle bore	mm	51
12-position disc turret
Hydraulic collet chuck
Coolant equipment
Part catcher
Bar feeder LNS Eco Load	mm	1 200
Tailstock with hydraulic quill
Chip conveyor
Tool probe
CNC OSP 700L

Machine in good condition. Under power in our warehouse and ready for inspection.

Kontakta oss om denna maskin

CNC Lathe Okuma LCS-15

Year: 1997

Capacities:
Max turning diameter	mm	270
Max turning length	mm	450
Spindle speed	rpm	6 000
Spindle bore	mm	51
12-position disc turret
3-jaw power chuck
Coolant equipment
Tailstock with hydraulic quill
Chip conveyor
Tool setter
CNC OSP 700L

Machine in good condition. Under power in our warehouse and ready for inspection.

Kontakta oss om denna maskin

CNC Lathe Okuma LCC-15

Year: 1989

Capacities:
Max turning diameter	mm	200
Max turning length	mm	280
Spindle speed	rpm	4 200
Spindle bore	mm	52
12-position disc turret
6-jaw manual chuck
Coolant equipment
Tool probe
CNC OSP 5000L-G